Type K Thermocouple on A Big Pipe Clamp to 2 Inches,Wide Working Temperature Range from -40 to 350°F; Model CT9

This is a K-type thermocouple with a pipe Clamp for HVAC Jobs, with 3 feet insulated curled cable on mini flat pin plug. The jaw range is upto 2 inches. This sensor Probe is specially designed for HVAC folks to take temperature on pipes or cylindrical surface. This probe cab be used with any equipment that takes type K thermocouple input, like multimeters/clamp meter or lab instruments, to measure temperature, HVAC service men use this to measure subcooling and super-heat. Its easier to get one for each line, just switch at the plug. One for each line, just switch at the plug.

SPECIFICATIONS:

• Jaw Open Size: 1/4" to 2" pipe diameter (outside diameter)
• Accuracy: +/-3°F; +/-1°F (0.5° C) after field calibration, 32 to 180°F (0 to 82°C)
• Temperature range: -50 to 350°F (-46 to 177°C)
• Thermocouple conductors: K-type nickel chromium/nickel aluminum.
• Probe insulation and clamp material: Calibration and atmosphere will affect maximum useful temperature in applications. The wire insulation and clamp material are designed to withstand a maximum continuous use at 350°F (177°C).
• Plug: K-type thermocouple male mini plug.
• Typical stabilization time: less than 30 seconds.

We have other Type K thermocouples, see the picture bellow to compare with T6 and T7, supplied by www.VIOT.us.