Large Compressor Oil/Fluorescent Dye Injector Charger Large 2 Oz

$45.77

Product may vary slightly from image representation.
You are looking at a brand new
2 oz Oil and/or Dye Injector , for AC/HVAC/R Services

needed by every HVAC service professional, if you do not have one, get it now!

 

Why oil injector is needed?
Answer: Compressor oil in the compressor of any refrigeration systems, get pumped along the refrigerant through the whole line of refrigerant, and get to a "balance" if the return of the refrigerant to the compressor is not restricted and the suction line is configured right. Other wise the compressor may run out of compressor oil. Replacement of a major part, like a condenser or evaporator in a refrigeration system, or even a dryer/filter, may remove a big part of the compressor oil with the replaced part. Any system with refrigerant leak, will leak oil as well. Restricted return make the compressor short of oil as well even in a newly installed system. In these cases, compressor oil needs to be added to the system. Compressors running short of compressor oil are likely to over-heat, lower efficiency, and add wearing to the compressor and may short the life of the compressor dramatically.

a link of a video demo:  https://youtu.be/vMMgRqa8jgU

How the compressor oil is added?

Answer: Use an Oil injector like this one, add the oil to the cylinder and...
see this files for details

https://viot.us/showFAQ.php"model=OI2
https://viot.us/showmanual.php"model=OI2

 

Advice: you have to be knowledgeable about the system, and inject the oil or dye from the low side.

 

FEATURES:

  • up to to 2 oz capacity. Re-loadable, reusable for years to come!
  • One shot is all it takes to cure a sickened compressor caused by low oil!
  • Compatible with fluorescent dyes for leak monitoring, too
  • Compatible with all oil types(POE, or mineral oil)
  • Re-loadable, re-usable, keep it in tool box for decades to come.
  • Aluminum alloy body, BUILT tough with brass connector.
  • 1/4" female connector, make it compatible with most AC systems.
  • 45 degree turn at the connection, easy to access port.
  • 5 inch flexible high pressure hose.
  • Hand operated(Screw-down), NOT in-line injector, do not need other power.
  • In stock and ready to ship.
  • Flat shipping rate to any where with US zip code.

Instruction and FAQ at: http://viot.us/showFAQ.php?model=OI2

 

16 item(s), $4,036.32
1 x Vacuum Supply Piston Vacuum Pump+ Inlet Vacuum Filter Dust Trap Workshop CNC Table etc
Vacuum Supply Piston Vacuum Pump+ Inlet Vacuum Filter Dust Trap Workshop CNC Table etc
1 x VIOT Set:CNC Vacuum Source Supply w/Oilless pump and Inlet Vacuum Filter, Liquid Trap Vacuum Pumps Protector
VIOT Set:CNC Vacuum Source Supply w/Oilless pump and Inlet Vacuum Filter, Liquid Trap Vacuum Pumps Protector
1 x Add-on in-line liquid & Dust Trap Vacuum pump protector
Add-on in-line liquid & Dust Trap Vacuum pump protector
1 x High Efficiency Twin Piston Oil-less Oilless Vacuum Pump 4.5 CFM w/Electric Switch/regulator/muffler Lab Workshop & Goat milker
High Efficiency Twin Piston Oil-less Oilless Vacuum Pump 4.5 CFM w/Electric Switch/regulator/muffler Lab Workshop & Goat milker
1 x VIOT Set:CNC Table Vacuum Source Supply w/Oilless pump and Inlet Vacuum Filter, Liquid Trap Vacuum Pumps Protector
VIOT Set:CNC Table Vacuum Source Supply w/Oilless pump and Inlet Vacuum Filter, Liquid Trap Vacuum Pumps Protector
1 x Small CNC Table Vacuum Source Supply w/Oil-less pump 3.4CFM, Inlet Vacuum Filter, Liquid Dust Trap Vacuum Pumps Protector
Small CNC Table Vacuum Source Supply w/Oil-less pump 3.4CFM, Inlet Vacuum Filter, Liquid Dust Trap Vacuum Pumps Protector
1 x Pump Intake line Solenoid, automatically turn off the air stream flow when the pump is off
Pump Intake line Solenoid, automatically turn off the air stream flow when the pump is off
1 x CNC Vacuum Source Supply w/Oil-less pump 4.5CFM, Inlet Vacuum Filter, Liquid Dust Trap Vacuum Pumps Protector
CNC Vacuum Source Supply w/Oil-less pump 4.5CFM, Inlet Vacuum Filter, Liquid Dust Trap Vacuum Pumps Protector
1 x High Efficiency Twin Piston OIL-LESS VACUUM PUMP: Twin Piston 1/2 HP 4.5 CFM +Power Switch, Goat Milker Pulsator Hookup, Laboratory Workshop Applications
High Efficiency Twin Piston OIL-LESS VACUUM PUMP: Twin Piston 1/2 HP 4.5 CFM +Power Switch, Goat Milker Pulsator Hookup, Laboratory Workshop Applications
1 x Adapter, connector, from 1/4 SAE Flare to 1/2 ACME, pump to manifold fitting
Adapter, connector, from 1/4 SAE Flare to 1/2 ACME, pump to manifold fitting
1 x EPA Applied Hose set for R410a Manifold gauges, replacement part 800 PSI
EPA Applied Hose set for R410a Manifold gauges, replacement part 800 PSI
1 x Best Detector:Heated Diode Pentode halogen Leak detector HD2 most Sensitive Professional HVAC Tool
Best Detector:Heated Diode Pentode halogen Leak detector HD2 most Sensitive Professional HVAC Tool
1 x Dual Size 1/4" and 5/16" Schrader/Schroeder/Dill Valve Core Remover/ Installer/Changer.
Dual Size 1/4" and 5/16" Schrader/Schroeder/Dill Valve Core Remover/ Installer/Changer.
1 x Best Seller:2-Stage Rotary Vane Pump VPD6 110 VAC 1/2 HP Motor Thermal Protected HVAC Evacuation Workshop Bagging
Best Seller:2-Stage Rotary Vane Pump VPD6 110 VAC 1/2 HP Motor Thermal Protected HVAC Evacuation Workshop Bagging
1 x AC DC True RMS Clamp Meter Ammeter DMM+Capacitor Tester+Type K Thermocouple New
AC DC True RMS Clamp Meter Ammeter DMM+Capacitor Tester+Type K Thermocouple New
1 x AC/DC True RMS Clamp Meter Ammeter Multimeter w/Capacitor Tester Type K Thermocouple Temperature Test Leads
AC/DC True RMS Clamp Meter Ammeter Multimeter w/Capacitor Tester Type K Thermocouple Temperature Test Leads