Twin Piston Oilless Oil-free Vacuum pump .3HP 3.4 CFM Oil-less Save Oil Clean exhaust WVP2 w/ UL Plug 5ft cord

$277.77

Product may vary slightly from image representation.

DRY RUN OILLESS VACUUM PUMP: Twin Piston 0.3 HP 3.4 CFM Good for workshop science and medical/dental labratory vacuum system hookup, broadly used in the oxygen concentration equipments. Push and pull capable. $ave the oil, no oil-mist problem,

FEATURES:Come with 5 ft power cord with UL plug;
  • OIL-free twin piston pump;
  • Designed and manufactured with the highest quality in materials and workmanship;
  • Quiet run at wide temperature ranges, from subzero to 120 degree F, start in cold.
  • Free Flow Rate: 3.4 CFM; good enough for a goat milker/pulsator hookup.
  • Push and pull/compressing and vacuum capable.
  • Thermal protected 0.3 HP (210 Watts) motor;
    Power Supply:120 VAC, 60 Hz;
    Insulation Class B;
    Capacitor: 25 μF, included;

  • Come with 4 rubber feet to reduce/absorb vibration and noise, for bolt/mount the pump at site;
  • Physical Dimensions:
    Size: 10(L) X 4.5(W) X 8(H) inch;
    Shipping Weight: 19 lb.
  • Intake/output Port: 1/4 female NPT; Optional adaptor to 1/2 barb;
  • One year warranty;
  • Optional addition: a mini dust filter on the intake port, to filter away the dust from the intake air, extend the life of the pump;
  • Optional addition: a mini muffler on the exhaust port for quieter operation(vacuum system only);
  • Optional addition: Adapter from 1/4 NPT to 1/2 barb available (either vacuum or compressing air);
  • Note: if both vacuum and compressing functions are used in the hookup, air flow rate will be dramatically reduced;
Packing List:

 

  • Pump, model HW280A2, one unit
  • Rubber feet: 4 units, with bolt, no nuts included;
  • Capacitor: 25 uF, 1 unit,
  • User Manual: 1 copy
  • Shipped in factory foam pack for better protection during shipping.


21 item(s), $3,784.01
1 x CNC Vacuum Source Supply w/Oil-less pump 5.5CFM and Inlet Vacuum Filter, Liquid Dust Trap Vacuum Pumps Protector
CNC Vacuum Source Supply w/Oil-less pump 5.5CFM and Inlet Vacuum Filter, Liquid Dust Trap Vacuum Pumps Protector
1 x AC/DC True RMS Clamp Meter Ammeter Multimeter w/Capacitor Tester Type K Thermocouple Temperature Test Leads
AC/DC True RMS Clamp Meter Ammeter Multimeter w/Capacitor Tester Type K Thermocouple Temperature Test Leads
1 x Cap 10 uFD Motor start run capacitor for Blower Fan or Compressor Motors in HVAC Workshop Long Life
Cap 10 uFD Motor start run capacitor for Blower Fan or Compressor Motors in HVAC Workshop Long Life
1 x Best Seller:2-Stage Rotary Vane Pump VPD6 110 VAC 1/2 HP Motor Thermal Protected HVAC Evacuation Workshop Bagging
Best Seller:2-Stage Rotary Vane Pump VPD6 110 VAC 1/2 HP Motor Thermal Protected HVAC Evacuation Workshop Bagging
1 x Pump Intake line Solenoid, automatically turn off the air stream flow when the pump is off
Pump Intake line Solenoid, automatically turn off the air stream flow when the pump is off
1 x CNC Vacuum Source Supply w/Oil-less pump 4.5CFM, Inlet Vacuum Filter, Liquid Dust Trap Vacuum Pumps Protector
CNC Vacuum Source Supply w/Oil-less pump 4.5CFM, Inlet Vacuum Filter, Liquid Dust Trap Vacuum Pumps Protector
1 x Dual Size 1/4" and 5/16" Schrader/Schroeder/Dill Valve Core Remover/ Installer/Changer.
Dual Size 1/4" and 5/16" Schrader/Schroeder/Dill Valve Core Remover/ Installer/Changer.
1 x Cap 30 uFD Motor start run capacitor for Blower Fan or Compressor Motors in HVAC Workshop Long Life
Cap 30 uFD Motor start run capacitor for Blower Fan or Compressor Motors in HVAC Workshop Long Life
1 x 2-Stage Rotary Vane High Performance Deep Vacuum Pump 1.8CFM+Built-in Check Valve Light Weight
2-Stage Rotary Vane High Performance Deep Vacuum Pump 1.8CFM+Built-in Check Valve Light Weight
1 x Cap 40 uFD Motor start run capacitor for Blower Fan or Compressor Motors in HVAC Workshop Long Life
Cap 40 uFD Motor start run capacitor for Blower Fan or Compressor Motors in HVAC Workshop Long Life
1 x A Pair of car/Boat AC R134a System port Quick Connection,Adapters,and a R134a Can Tap bottle opener:
A Pair of car/Boat AC R134a System port Quick Connection,Adapters,and a R134a Can Tap bottle opener:
1 x A Pair of R410a System Port Manifold Gauge Adapters 1/4 Male Flare X 5/16 female flare Swivel
A Pair of R410a System Port Manifold Gauge Adapters 1/4 Male Flare X 5/16 female flare Swivel
1 x Cap 25 uFD Motor start run capacitor for Blower Fan or Compressor Motors in HVAC Workshop Long Life
Cap 25 uFD Motor start run capacitor for Blower Fan or Compressor Motors in HVAC Workshop Long Life
1 x Cap 20 uFD Motor start run capacitor for Blower Fan or Compressor Motors in HVAC Workshop Long Life
Cap 20 uFD Motor start run capacitor for Blower Fan or Compressor Motors in HVAC Workshop Long Life
1 x OIL-LESS VACUUM Pump System: automatic max vacuum pressure control, tank Regulator Gauge
OIL-LESS VACUUM Pump System: automatic max vacuum pressure control, tank Regulator Gauge
2 x Vacuum Supply Piston Vacuum Pump+ Inlet Vacuum Filter Dust Trap Workshop CNC Table etc
Vacuum Supply Piston Vacuum Pump+ Inlet Vacuum Filter Dust Trap Workshop CNC Table etc
1 x Small CNC Table Vacuum Source Supply w/Oil-less pump 3.4CFM, Inlet Vacuum Filter, Liquid Dust Trap Vacuum Pumps Protector
Small CNC Table Vacuum Source Supply w/Oil-less pump 3.4CFM, Inlet Vacuum Filter, Liquid Dust Trap Vacuum Pumps Protector
1 x Adapter, connector, from 1/4 SAE Flare to 1/2 ACME, pump to manifold fitting
Adapter, connector, from 1/4 SAE Flare to 1/2 ACME, pump to manifold fitting
1 x AC DC True RMS Clamp Meter Ammeter DMM+Capacitor Tester+Type K Thermocouple New
AC DC True RMS Clamp Meter Ammeter DMM+Capacitor Tester+Type K Thermocouple New
1 x EPA Applied Hose set for R410a Manifold gauges, replacement part 800 PSI
EPA Applied Hose set for R410a Manifold gauges, replacement part 800 PSI