VPD12: Industrial Size 2-Stages Deep Vacuum Pump 12CFM 25 Micron 1 HP Epoxy Resin Bagging Infusion Infiltration

FEATURES:

• Aluminum ALLOY CASING: Alloy casing has high heat - dissipation keeping motor and pump cool, light weight and efficient.
• Two-Stage Rotary Vane Deep Vacuum Pump
• Direct coupling between the motor and pump results in quiet running and good performance.
• Oil drain valve positioned at bottom of oil reservoir.
• Isolation valve built-in to the intake port(a $25 value)
• SPECIFICATION:
  POWER SUPPLY :110 VOLT
  PUMPING RATE: 12 CFM
  POWER: 1 HP
  INTAKE PORT: 1/4 inch male SAE, and 3/8 inch Male SAE flare, optional adapter to 1/2" ACME, or 5/16" barbed, $7.00
  WEIGHT: 40 Lb
  MAX VACUUM:25 MICRONS
  OIL CAPACITY:500 ml
• Come with 2 bottles of vacuum pump oil, just dump it in, you are ready to go!
• Power cord come with the pump; power switch on the pump too.
• Ballast valve on top of the pump, make sure to close it if deep vacuum is desired; use this valve to purge clean the system from contamination of volatiles.