Compressor Oil/Fluorescent Dye Injector Charger Capacity:1/2 Oz

$24.77

Product may vary slightly from image representation.
You are looking at a brand new
1/2 oz Oil and/or Dye Injector , for AC/HVAC/R Services

needed by every HVAC service professional

one shot may save a compressor!

Why oil injector is needed?
Answer: Compressor oil in the compressor of any refrigeration systems, get pumped along the refrigerant through the whole line of refrigerant, and get to a "balance" if the return of the refrigerant to the compressor is not restricted and the suction line is configured right. Other wise the compressor may run out of compressor oil. Replacement of a major part, like a condenser or evaporator in a refrigeration system, or even a dryer/filter, may remove a big part of the compressor oil with the replaced part. Any system with refrigerant leak, will leak oil as well. Restricted return make the compressor short of oil as well even in a newly installed system. In these cases, compressor oil needs to be added to the system. Compressors running short of compressor oil are likely to over-heat, lower efficiency, and add wearing to the compressor and may short the life of the compressor dramatically.
How the compressor oil is added?
Answer: Use an Oil injector like this one, add the oil to the cylinder and hook it up the the service port. Squeeze it in when you screw-down the injector. Oil may be charged to any part of the refrigeration system, injection ot the return/suction line is recommended. This injector does not need the working compressor to get the job done, however, you may notice that its easier to load the oil from the Low side if the system is running. Watch the oil level if the compressor has a sight-viewing glass. Make sure the air is emptied from the injector (like a nurse doing an injection to a patient) before hooking the injector to the service port!

Free Advice: you have to be knowledgeable about the system, and inject the oil or dye from the low side.

WE DO NOT SELL ANY THING THAT is supposed TO WORK,
WE SELL EVERY THING GUARANTEED TO WORK! IF THIS MAKES SENSE TO YOU, BUY FROM US!

FEATURES:

  • 1/2 oz capacity. Re-loadable, reusable for years to come!
  • One shot is all it takes to cure a sickened compressor caused by low oil!
  • Compatible with fluorescent dyes for leak monitoring, too
  • Compatible with all oil types(POE, or mineral oil)
  • Re-loadable, re-usable, keep it in tool box for decades to come.
  • Aluminum alloy body, BUILT tough with brass connector.
  • 1/4" female connector, make it compatible with most AC systems.
  • 5 inch flexible high pressure hose.
  • Hand operated(Screw-down), NOT in-line injector, do not need other power.
  • In stock and ready to ship.
  • Flat shipping rate to any where with US zip code.

WE SUPPLY HVAC SCHOOLS AND CONTRACTORS!
EMAIL ALL QUESTIONS TO JOHN

19 item(s), $4,551.49
1 x Small CNC Table Vacuum Source Supply w/Oil-less pump 3.4CFM, Inlet Vacuum Filter, Liquid Dust Trap Vacuum Pumps Protector
Small CNC Table Vacuum Source Supply w/Oil-less pump 3.4CFM, Inlet Vacuum Filter, Liquid Dust Trap Vacuum Pumps Protector
1 x High Efficiency Twin Piston Oil-less Oilless Vacuum Pump 4.5 CFM w/Electric Switch/regulator/muffler Lab Workshop & Goat milker
High Efficiency Twin Piston Oil-less Oilless Vacuum Pump 4.5 CFM w/Electric Switch/regulator/muffler Lab Workshop & Goat milker
1 x Cap 40 uFD Motor start run capacitor for Blower Fan or Compressor Motors in HVAC Workshop Long Life
Cap 40 uFD Motor start run capacitor for Blower Fan or Compressor Motors in HVAC Workshop Long Life
1 x VIOT Set:CNC Vacuum Source Supply w/Oilless pump and Inlet Vacuum Filter, Liquid Trap Vacuum Pumps Protector
VIOT Set:CNC Vacuum Source Supply w/Oilless pump and Inlet Vacuum Filter, Liquid Trap Vacuum Pumps Protector
1 x A Pair of R410a System Port Manifold Gauge Adapters 1/4 Male Flare X 5/16 female flare Swivel
A Pair of R410a System Port Manifold Gauge Adapters 1/4 Male Flare X 5/16 female flare Swivel
1 x Cap 35 uFD Motor start run capacitor for Blower Fan or Compressor Motors in HVAC Workshop Long Life
Cap 35 uFD Motor start run capacitor for Blower Fan or Compressor Motors in HVAC Workshop Long Life
1 x VIOT Pump Set: CNC Table, Vacuum Source for Vacuum Chuck Woodturning Vacuum bagging/packing, Come with Inlet Vacuum Filter, Liquid Trap and the Vacuum Pump 5.5 CFM 3/4 HP
VIOT Pump Set: CNC Table, Vacuum Source for Vacuum Chuck Woodturning Vacuum bagging/packing, Come with Inlet Vacuum Filter, Liquid Trap and the Vacuum Pump 5.5 CFM 3/4 HP
1 x Cap 20 uFD Motor start run capacitor for Blower Fan or Compressor Motors in HVAC Workshop Long Life
Cap 20 uFD Motor start run capacitor for Blower Fan or Compressor Motors in HVAC Workshop Long Life
1 x OIL-LESS VACUUM Pump System: automatic max vacuum pressure control, tank Regulator Gauge
OIL-LESS VACUUM Pump System: automatic max vacuum pressure control, tank Regulator Gauge
1 x AC DC True RMS Clamp Meter Ammeter DMM+Capacitor Tester+Type K Thermocouple New
AC DC True RMS Clamp Meter Ammeter DMM+Capacitor Tester+Type K Thermocouple New
1 x 2-Stage Rotary Vane High Performance Deep Vacuum Pump 1.8CFM+Built-in Check Valve Light Weight
2-Stage Rotary Vane High Performance Deep Vacuum Pump 1.8CFM+Built-in Check Valve Light Weight
1 x Best Seller:Manifold Gauge Set with 3-Way Colored Hoses Set Newer Design Model: GMV2 with Temperature Marked for R410a, R22,
Best Seller:Manifold Gauge Set with 3-Way Colored Hoses Set Newer Design Model: GMV2 with Temperature Marked for R410a, R22,
1 x Exhaust Muffler Oil mist eliminator for Oiled Rotary Vacuum Pump: oil repellent Filtered VIOT Model Muf6O 3/4 NPT
Exhaust Muffler Oil mist eliminator for Oiled Rotary Vacuum Pump: oil repellent Filtered VIOT Model Muf6O 3/4 NPT
1 x Cap 30 uFD Motor start run capacitor for Blower Fan or Compressor Motors in HVAC Workshop Long Life
Cap 30 uFD Motor start run capacitor for Blower Fan or Compressor Motors in HVAC Workshop Long Life
1 x Cap 10 uFD Motor start run capacitor for Blower Fan or Compressor Motors in HVAC Workshop Long Life
Cap 10 uFD Motor start run capacitor for Blower Fan or Compressor Motors in HVAC Workshop Long Life
1 x Best Seller:2-Stage Rotary Vane Pump VPD6 110 VAC 1/2 HP Motor Thermal Protected HVAC Evacuation Workshop Bagging
Best Seller:2-Stage Rotary Vane Pump VPD6 110 VAC 1/2 HP Motor Thermal Protected HVAC Evacuation Workshop Bagging
1 x OIL-LESS VACUUM Pump System: automatic max vacuum pressure control, tank Regulator Gauge
OIL-LESS VACUUM Pump System: automatic max vacuum pressure control, tank Regulator Gauge
1 x Add-on in-line liquid & Dust Trap Vacuum pump protector
Add-on in-line liquid & Dust Trap Vacuum pump protector
1 x Vacuum Supply Piston Vacuum Pump+ Inlet Vacuum Filter Dust Trap Workshop CNC Table etc
Vacuum Supply Piston Vacuum Pump+ Inlet Vacuum Filter Dust Trap Workshop CNC Table etc