New Products

AC/DC True RMS Clamp Meter Ammeter Multimeter w/Capacitor Tester Type K Thermocouple Temperature Test Leads

BRAND NEW DIGITAL CLAMP METER, VOLT AMP OHM METER, MULTIMETER WITH K TYPE THERMOCOUPLE AND TEST LEADS You are looking at a brand new(in the box) DIGITAL AMMETER/CLAMP METER, MULTIMETER, Type II, WITH TEST LEADS & K TYPE THERMOCOUPLE. New Model: C7, for

BRAND NEW DIGITAL AC/DC AMPMETER, MULTIMETER, CAPACITOR TESTER WITH K TYPE THERMOCOUPLE AND capacitor tester, come with TEST LEADS & K TYPE THERMOCOUPLE

Model HLD9 Halogen Freon Refrigerant Leak Detector Corona Discharge+Carrying Storage Case Extra Sensor Tip included sensitive

HVAC Tool:Air Brush Flush Retrofit Cleaning Tool Kit Canister, Hose, injecting gun, capacity 28oz

HVAC Tool:Car AC Port Quick Coupler Connector Pair 1/4 flare or 14mm good for All Manifold Gauges. work R134a and R22 manifold gauge sets

Low Side Quick Connector Adapter, Car AC System Port 14 mm 1/4 flare 16mm, Pair of adapter/couplers available

High Side Quick Connector Adapter only (16 MM), Car AC System Port, high and low in apir available.

VPDS6; Single-stage rotary vane pump 6.0 CFM; single phase(110 VAC 60Hz) 1/2 HP motor; Continuous Duty VACUUM PUMP, 40-MICRON RATING(29.93 inch Hg, Deep Vacuum)

VPD12a: Industrial Size 2-Stages Deep Vacuum Pump 11.5CFM 25 Micron 3/4 HP Epoxy Resin Bagging Infusion Infiltration industriala

VIOT VPD10 2-stage high efficient deep vacuum pump industrial size good for AC system evacuation, workshop Setups, Epoxy Resin Silicone vacuum infusion/infiltration, vacuum bagging

Halogen freon refrigerant Leak Detector HLD7a Battery Powered, Corona discharge Sensor Advanced analytic circuit Sensitive

VIOT 1/4" and 5/16" Valve Core Remover/ Installer/Changer,One tool works on 2 sizes of valves! Yes, work on charged system without leaking refrigerant to get the valve core replaced!

Adapters: 5/16 " X 1/4 " swivel female connector, straight adapter with Manual ball Valve , Needed by your AC service tools to attach to AC systems/tools with 1/4" SAE to system port with 5/16 SAE connector for recovery/charging/diagnosis, adding oil/dye

2 oz Oil and/or Dye Injector , for AC/HVAC/R Services needed by every HVAC service professional, if you do not have one, get it now!

Type K Thermocouple, accurate from -40 to 350°F This is a K type thermocouple, with 3 feet insulated wire on mini flat pin plug.