VPD12a: Industrial Size 2-Stages Deep Vacuum Pump 11.5CFM 25 Micron 3/4 HP Epoxy Resin Bagging Infusion Infiltration

$597.77 $377.77

VPD12a: Industrial Size 2-Stages Deep Vacuum Pump 11.5CFM 25 Micron 3/4 HP Epoxy Resin Bagging Infusion Infiltration
Product may vary slightly from image representation.
  • Model:VPD12a
BRAND NEW, VPD12:Continuous Duty Deep Vacuum Pump 11.5 CFM 3/4 HP 2-Stage . VIOT model: VPD12; 2-stage rotary vane pump mechanism, 11.5 CFM; single phase(110 VAC) 3/4 HP motor; DEEP VACUUM PUMP,12-MICRON RATING, BEST in this industry! Welcome to compare with any source of supplies before buying from us!

Industrial size, air vacuum pump, suggested use:
Workshop Setups for Epoxy Resin Silicone vacuum infusion/infiltration, vacuum bagging for airplane/boat/auto body repair, woodworking operations, like lamination etc,
printing, HVAC evacuation jobs of large systems,
and any other equipment/labs where a high vacuum is desired. This series of pumps is market proven the most reliable pump.

We have pumps from 1.5 CFM to 12 CFM; There must be one satisfy your requirements!

FEATURES:
  • Aluminum ALLOY CASING: Alloy casing has high heat - dissipation keeping motor and pump cool, light weight and efficient.
  • Two-Stage Rotary Vane Deep Vacuum Pump
  • Direct drive motor allowing easy starting and is maintenance free.
  • Direct coupling between the motor and pump results in quiet running and good performance.
  • FORCE FED LUBRICATION Provides clean, filtered oil to all internal bearings and wearing surfaces regardless of the pump operation. Cleaner oil reduces ware and breakdowns.
  • Great tool for: System evacuation(Refrigeration or Air Conditioning), Printing, medical, Vacuum Packing, Hot Forming Plastics and other requirements where a high quality pump may be required.
  • Oil drain valve positioned at bottom of oil reservoir.
  • SPECIFICATION:
    POWER SUPPLY :110 VOLT
    PUMPING RATE: 11.5 CFM
    POWER: 3/4 HP
    INTAKE PORT: 1/4 inch male SAE, and 3/8 inch Male SAE flare
    WEIGHT: 39 Lb
    MAX VACUUM:12 MICRONS, best rating in the industry!
    OIL CAPACITY:500 ml
  • Come with 2 bottles of vacuum oil, just dump it in, you are ready to go!
  • Power cord come with the pump; power switch on the pump too.
  • Ballast valve on top of the pump, make sure to close it if deep vacuum is desired; use this valve to purge clean the system from contamination of volatiles.

VPD12a: Industrial Size 2-Stages Deep Vacuum Pump 11.5CFM 25 Micron 3/4 HP Epoxy Resin Bagging Infusion Infiltration
  • Model:VPD12a