VPD12: Industrial Size 2-Stages Deep Vacuum Pump 12CFM 25 Micron 1 HP Epoxy Resin Bagging Infusion Infiltration

$467.77 $377.77

VPD12: Industrial Size 2-Stages Deep Vacuum Pump 12CFM 25 Micron 1 HP Epoxy Resin Bagging Infusion Infiltration
Product may vary slightly from image representation.
  • Model:VPD12
BRAND NEW, VPD12 Deep Vacuum Pump 12 CFM 1HP 2-Stage 25 Micron. VIOT model: VPD12; 2-stage rotary vane pump mechanism, 12 CFM; single phase(110 VAC) 1 HP motor; DEEP VACUUM PUMP, 25-MICRON RATING

Industrial size, continuous duty air pump, suggested use:
Designed for professional HVAC Evacuation jobs, big or small; come with 1/4 and 3/8" SAE flair intake ports.

We have pumps from 1.5 CFM to 12 CFM; There must be one satisfy your requirements!


FEATURES:

  • Aluminum ALLOY CASING: Alloy casing has high heat - dissipation keeping motor and pump cool, light weight and efficient.
  • Two-Stage Rotary Vane Deep Vacuum Pump
  • Direct coupling between the motor and pump results in quiet running and good performance.
  • Oil drain valve positioned at bottom of oil reservoir.
  • Isolation valve built-in to the intake port(a $25 value)
  • SPECIFICATION:
    POWER SUPPLY :110 VOLT
    PUMPING RATE: 12 CFM
    POWER: 1 HP
    INTAKE PORT: 1/4 inch male SAE, and 3/8 inch Male SAE flare, optional adapter to 1/2" ACME, or 5/16" barbed, $7.00
    WEIGHT: 40 Lb
    MAX VACUUM:25 MICRONS
    OIL CAPACITY:500 ml
  • Come with 2 bottles of vacuum pump oil, just dump it in, you are ready to go!
  • Power cord come with the pump; power switch on the pump too.
  • Ballast valve on top of the pump, make sure to close it if deep vacuum is desired; use this valve to purge clean the system from contamination of volatiles.


User manual at: http://www.viot.us/showmanual.php?model=pumps
Frequently asked question at: http://www.viot.us/showshowFAQ.php?model=pumps
VPD12: Industrial Size 2-Stages Deep Vacuum Pump 12CFM 25 Micron 1 HP Epoxy Resin Bagging Infusion Infiltration
  • Model:VPD12