Accessories

Adapters: 5/16 " X 1/4 " swivel female connector, straight adapter with Manual ball Valve , Needed by your AC service tools to attach to AC systems/tools with 1/4" SAE to system port with 5/16 SAE connector for recovery/charging/diagnosis, adding oil/dye

Type K Thermocouple, accurate from -40 to 350°F This is a K type thermocouple, with 3 feet insulated wire on mini flat pin plug.

Type K Thermocouple Temperature Sensor with 2 Separate Round banana plugs

Cleans and straightens condenser and evaporator fins. Six sided head make this tool 6 in 1 for multiple applications. fin densities: 6, 8, 10, 12, 14 and 15 fins per inch .

Description: Regular duty Fit meters by Fluke, Amprobe, Viot, and other manufacturers Universal Multimeter/Clamp Meter accessory test lead pair, Test Lead Pair 2 test probes(2mm), with colored insulated cable. Test Lead Pair: with standard diamete

Tester, Heavy Duty Test Leads for Clamp Meters Multimeters, made with silicone for the insulation

NTC Temperature Sensor black with 198 inch cable wire

add -on service Valves schrader valves: 1/4" SAE Male flair service valve, 4 in a package for the price. each add-on valve comes with a brass cover, rubber o-ring seal to help seal the valve, this cover also have the valve opener/closer, each add-on valve has a 3.5 inch 1/4" co

Car AC, R134a Can Tap Tapper Direct Charging Tool, with 14 mm Low Side quick connector; No Manifold, Nor quick connector Needed HEAVY DUTY DESIGN,

Adapter Set of 3, 5/16 male flare X 1/4" female flare, serve as adapters, Couplers with Manual hand Valves, size conversion between R410a tool and system ports, HVAC tool

Check Valve, for Refrigeration Lines, or Air/fluid lines Prevent Back Flow on any refrigeration line or fluid line, so one direction of flow is allowed. Heavy duty brass body construction. 5/8" copper pine can be brazed/soldered directly. prevent backflow this listing is for ONE UNIT.

10 Service Port Schrader valves Dill Valve Cores, Core Replacements, compatible with all Refrigerants, Heavy Duty Teflon seal. 10 in a package. Lot sale, replacement valve cores, with Teflon seal, its more durable than traditional rubber seal. standard size, good for all refrigerant systems, system ports, fits lines of all manufacturer.

Ball Valve, 1/4" Male NPT X 1/4" Female NPT Connection as seen in picture, 1/4 turn to full open to full closed. this valve fits most of the small pumps we sell as an add-on manual control valve, may be used on vacuum pump intake port, to isolate the pump and the vacuum system, for evacuation or any where you need to isolate the line, liquid or gas or air systems.

Tap1:Heavy Duty Car AC R134a Can Tap Tapper Opener 1/4"MFL Connector to R22 Manifold for Car Service HVAC Tool

Vacuum Pump Oil 400 ml(13 oz) Viscosity Index 100 Clear Synthetic

Vacuum pump Intake Port: with hand valve: from 3/8 NPT to 1/4 and 3/8 inch SAE male Flare with a built-in hand valve, ball valve, isolation or check valve, hand operated, to prevent the vacuum pump oil being sucked out of the vacuum pump, to protect what