Accessories

Type K Thermocouple Temperature Sensor with 2 Separate Round banana plugs

Type K Thermocouple, accurate from -40 to 350°F This is a K type thermocouple, with 3 feet insulated wire on mini flat pin plug.

Description: Regular duty Fit meters by Fluke, Amprobe, Viot, and other manufacturers Universal Multimeter/Clamp Meter accessory test lead pair, Test Lead Pair 2 test probes(2mm), with colored insulated cable. Test Lead Pair: with standard diamete

NTC Temperature Sensor black with 198 inch cable wire

Tester, Heavy Duty Test Leads for Clamp Meters Multimeters, made with silicone for the insulation

add -on service Valves schrader valves: 1/4" SAE Male flair service valve, 4 in a package for the price. each add-on valve comes with a brass cover, rubber o-ring seal to help seal the valve, this cover also have the valve opener/closer, each add-on valve has a 3.5 inch 1/4" co

Cleans and straightens condenser and evaporator fins. Six sided head make this tool 6 in 1 for multiple applications. fin densities: 6, 8, 10, 12, 14 and 15 fins per inch .

10 Service Port Schrader valves Dill Valve Cores, Core Replacements, compatible with all Refrigerants, Heavy Duty Teflon seal. 10 in a package. Lot sale, replacement valve cores, with Teflon seal, its more durable than traditional rubber seal. standard size, good for all refrigerant systems, system ports, fits lines of all manufacturer.

Tap1:Heavy Duty Car AC R134a Can Tap Tapper Opener 1/4"MFL Connector to R22 Manifold for Car Service HVAC Tool

Ball Valve, 1/4" Male NPT X 1/4" Female NPT Connection as seen in picture, 1/4 turn to full open to full closed. this valve fits most of the small pumps we sell as an add-on manual control valve, may be used on vacuum pump intake port, to isolate the pump and the vacuum system, for evacuation or any where you need to isolate the line, liquid or gas or air systems.

Check Valve, for Refrigeration Lines, or Air/fluid lines Prevent Back Flow on any refrigeration line or fluid line, so one direction of flow is allowed. Heavy duty brass body construction. 5/8" copper pine can be brazed/soldered directly. prevent backflow this listing is for ONE UNIT.

Brass Y Adapter, Manifold 3-Way all 5/8 inch milti-barb Connections

Car AC, R134a Can Tap Tapper Direct Charging Tool, with 14 mm Low Side quick connector; No Manifold, Nor quick connector Needed HEAVY DUTY DESIGN,

Vacuum Pump Oil 400 ml(13 oz) Viscosity Index 100 Clear Synthetic

Black Utility vacuum Hose for 4-way manifold gauges, 36" in length 600 PSI Working pressure 3000 PSI Burst 3/8" SAE flare fittings on both ends for quick evacuation service in HVAC.