Accessories

Vacuum Pump Oil 400 ml(13 oz) Viscosity Index 100 Clear Synthetic

Ball Valve, 1/4" Male NPT X 1/4" Female NPT Connection as seen in picture, 1/4 turn to full open to full closed. this valve fits most of the small pumps we sell as an add-on manual control valve, may be used on vacuum pump intake port, to isolate the pump and the vacuum system, for evacuation or any where you need to isolate the line, liquid or gas or air systems.

Black Utility vacuum Hose for 4-way manifold gauges, 36" in length 600 PSI Working pressure 3000 PSI Burst 3/8" SAE flare fittings on both ends for quick evacuation service in HVAC.

Check Valve, for Refrigeration Lines, or Air/fluid lines Prevent Back Flow on any refrigeration line or fluid line, so one direction of flow is allowed. Heavy duty brass body construction. 5/8" copper pine can be brazed/soldered directly. prevent backflow this listing is for ONE UNIT.

Cleans and straightens condenser and evaporator fins. Six sided head make this tool 6 in 1 for multiple applications. fin densities: 6, 8, 10, 12, 14 and 15 fins per inch .

Adapters: 5/16 " X 1/4 " swivel female connector, straight adapter with Manual ball Valve , Needed by your AC service tools to attach to AC systems/tools with 1/4" SAE to system port with 5/16 SAE connector for recovery/charging/diagnosis, adding oil/dye

Adapter Set of 3, 5/16 male flare X 1/4" female flare, serve as adapters, Couplers with Manual hand Valves, size conversion between R410a tool and system ports, HVAC tool

High Pressure Hose Set for Manifold Gauges 1/4 Flare Fittings Good for All Refrigerants R410a R22 R404 R407 and all the retrofit replacement

replacement Hoses 3 in a set for Manifold Gauges: R134a R22 R12; 600 PSI Work 3000 PSI Burst Pressure, hoses age and get old, cracked dangerous and hard to use over time. This is a replacement set.

Description: Regular duty Fit meters by Fluke, Amprobe, Viot, and other manufacturers Universal Multimeter/Clamp Meter accessory test lead pair, Test Lead Pair 2 test probes(2mm), with colored insulated cable. Test Lead Pair: with standard diamete

Tester, Heavy Duty Test Leads for Clamp Meters Multimeters, made with silicone for the insulation

Oiled Rotary Vacuum Pump Exhaust Muffler:VIOT pumps & Others Model Muf6 3/4 NPT

Vacuum pump Intake Port: with hand valve: from 3/8 NPT to 1/4 and 3/8 inch SAE male Flare with a built-in hand valve, ball valve, isolation or check valve, hand operated, to prevent the vacuum pump oil being sucked out of the vacuum pump, to protect what

Piston Pump Rebuild kit, for Oil-less dry run VIOT+ Vacuum Pumps Seals valves that make worn out pump anew

Piston Pump Rebuild kit, for Oilless VIOT+ Vacuum Pumps Cylinders Seals valves,make worn out pump anew

NTC Temperature Sensor black with 198 inch cable wire