Simple Complete Goat Bucket Milker Machine with All the Parts Needed:6CFM vacuum pump, 5 Liter seamless SS Milking Pail, Claw Pulsator,
Shells and Liners, the air and milk Hoses. Tested and Proven Working by hundreds sold in the Hands of Small Farmers. Just make a few connections of the hoses, you are ready to milk goats, one at a time.
As pictured: Baic Goat Milker with the parts as listed bellow for single station goat milking
Just connect a few hoses, easy to assemble and operate, light to carry to milking site
Come with 6 CFM vacuum pump, good for goat or cow milking
Come with 5 Liter seamless milker pail bucket with lid and liner
Claw: Bottom unload; with relief valve on the claw, clear PC cover to see the action.
Large clear plastic Milk-shell/Teat cups with matching white Silicone inflation liners
Clear PVC Flexible milk hoses: Use between milk tank and the claw, 5/8 inch ID, 1 inch OD, thick wall, 9 feet long
Clear PVC Flexible Air hoses: Use between pulsator on milk tank and the claw, 1/4 inch ID thick wall, 9 feet long
Plus short Air hoses and milk hoses between claw and the shells, Clear PVC flexible
- Seamless Milk Tank/becket/pail for milking goat: 5 liter capacity with SS lid and liner, one unit
- Vacuum pump: 6 CFM 1/2 HP 110VAC, 1 unit
- Pulsator: model L80, 1 unit
- Goat claw Cluster: 1 unit, come assembled together with these parts: all made of food grade materials:
Vacuum hose between pump and milk bucket, thick wall, 1/2 inch ID, 5 feet long, clear PVC flexible: 1 unit
Brass barbed adapter from pump 3/8 flare port to 1/2 ID hose
Milk hose, thick wall 5/8 inch ID, 9 feet in length, clear PVC flexible: 1 unit
All materials in the set are food grade.
- Goat Milk claw: 1 unit.
- Large liners for teat cups, 5/8 inch: 2 units
- short Air hose, clear PVC flexible: 2 units
- Short Milk hose, clear PVC flexible: 2 units
Comparing The Goat Shells/Liners for Nigerian Goats:
Note: We understand the Nigerian goats are dwarf with shorter legs and the teats are smaller too. For these reasons, smaller teat-cups with matching liners are demanded. The claw clusters that we have are used for this variety. In case you have any doubt about this claim, read the lower part so you have all the numbers to compare to make a decision and choose what to use for your Nigerian goats. We use the measurement of the smallest shell/liner/claw body for this comparison purpose.
See these pictures first: the shorter with PVC hose connections is milkersupply.com's model, out model.
|Our Model GCC||Competitors |
|Over all Length|| 8 inch (203 mm) ||8 5/8 inches (219 mm)|
|Thickness: OD|| 2 3/16 inch (58 mm) ||2 1/8 inches (56 mm) |
|Teat Open: ID|| 21 mm || 17 mm|
|Claw:|| Dual, each shell end, and one online ||Shell ends only|
FAQ of this Product Manual/Instruction