You are looking at a BRAND NEW 2-STAGE DEEP VACUUM PUMP model: VPB1.5; single phase 110 VAC; double(2) stage rotary vane VACUUM PUMP; 1.58CFM, 1/4 HP
WE DO NOT SELL ANY THING THAT is supposed TO WORK, WE SELL EVERY THING THAT IS GUARANTEED TO WORK! IF THIS MAKE SENSE TO YOU, BUY FROM US!
FEATURES: p> - Aluminum ALLOY CASING: Alloy casing,
- Japanese design, Very light in weight, about 10 lb, take it any where(say, rooftop) and get the job done.
- Double(2)-Stage Rotary Vane Vacuum Pump
- Direct drive motor allowing easy starting and is maintenance free.
- Elastomeric coupling between the motor and pump results in quiet running and good performance.
- FORCE FED LUBRICATION Provides clean, filtered oil to all internal bearings and wearing surfaces regardless of the pump operation. Cleaner oil reduces ware and break downs.
- Great pump for HVAC jobs, bell jar/desiccator evacuation, jewelry gluing jobs, or any thing light(non-continuous) duty jobs. this pump bring water to boil at room temperature easily, but this pump is NOT designed for molding work or industrial, continuous heavy duty jobs. DO not use this pump for over 1 hour at max vacuum.
- Oil drain valve positioned at bottom of oil reservoir.
- SPECIFICATION:
POWER SUPPLY: 110 VOLT
PUMPING RATE: 1.58 CFM
POWER: 1/4 HP(200 W)
INTAKE PORT: 1/4 inch SAE, and 3/8 inch SAE flair
WEIGHT: 10 Lb
MAX VACUUM: 38 micron or 0.05 mbar absolute pressure(more than 29.9 in Hg vacuum)
- Oil Capacity: 6 oz(140 ml);
- Come with 1 bottles of vacuum oil(200 ml), just dump it in, you are ready to go!
- Power cord come with 5 ft wire and 3-prong plug(15 A 125 VAC, North America Standard);
- power switch on the pump too.
- Great pump for home auto AC jobs, bell jar/desiccator evacuation, jewelry gluing jobs, or any thing light(non-continuous) duty jobs. this pump bring water to boil at room temperature easily, but this pump is NOT designed for any workshop/industrial, continuous heavy duty jobs. use pumps modeled VPD3, VPD5, VPD8, VPD10 or VPD12 for these applications. DO not use this pump for over 1 hour at max vacuum.
Note: this pump is not recommended for workshop, Lab or industrial setups; use pumps modeled VPD3, VPD5, VPD8, VPD10 or VPD12 for these applications.
For More Pump information:
User manual Down Load: click here now! http://viot.us/showmanual.php?model=VPD5
Frequently Asked Questions: http://viot.us/showFAQ.php?model=VPD5&sw=0 WE SUPPLY HVAC SCHOOLS AND CONTRACTORS!
EMAIL ALL QUESTIONS TO JOHN
|
